DOI:
https://doi.org/10.69717/jaest.v2.i2.37Keywords:
Date palm wood, Phoenix Dactylifera (L), Insulator material, Wood ‐ cement compositesAbstract
This work reports the results of an experimental study on the incorporation of woodwaste date palm reduced in particles for the manufacture of wood – cement composites. Thesematerials are chipper than the conventional insulator material and environmental friendly. Fivetypes of wood – cement composites with various concentrations of the wood particles, ie. 2, 4, 6, 8and 10% of total volume, were made according to defined protocol and mix design. Their thermaland mechanical properties were measured and compared to other conventional materials. Theobtained results show that the thermal conductivity is positively correlated to the content ofparticles in the mixture. The compressive strength of composites decreases where the content ofparticles increase. However, taking account of the ASTM C 109 / C109‐95 standard, the wood –cement composite contained 10% of wood particles, considered as lightweight concrete, could beused as non‐structural material in construction.
Downloads
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Toufik Arrif1, Adel Benchabane, Abdelmadjid Chehhat, Abdelfetah Belaid, Amar Rouag, Numerical simulation of convective heat losses in a helical tube of a cylindrical solar receiver , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Mohamed-Ali Djebiret, Brahim Abbad, Adel Benchabane, Maamar Ouali, Ferhat Yahi, Mohand Berdja, Amar Rouag, Experimental study of solar adsorption refrigeration device , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Amar Rouag, Adel Benchabane, Adnane Labed, Nora Boultif, Thermal design of air cooled condenser of a solar adsorption refrigerator , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Adnane Labed, Amar Rouag, Adel Benchabane, Noureddine Moummi, Mohammed Zerouali, Applicability of solar desiccant cooling systems in Algerian Sahara: Experimental investigation of flat plate collectors , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Hocine Benfatah, Adel Benchabane, Amar Rouag, Adnane Labed, Feasibility of solar adsorption air-conditioning in the region of Biskra: Reflection on the government support for electricity bills , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Adel Benchabane, Editorial preface to the first volume of Journal of Applied Engineering Science & Technology , Journal of Applied Engineering Science & Technology: Vol. 1 No. 1 (2014): JAEST
Similar Articles
- Salima Rezig, Ahmed Bouaziz, Abdallah Zatar, Experimental investigation on the optimal formulation of dune sand concrete reinforced with date palm fibers , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Karima Gadri, Abdelhamid Guettala, Study of the adaptation of the sand concrete as repair material associated with an ordinary concrete substrate , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Hamza Guenfoud, Hassina Ziou, Mohamed Himeur, Mohamed Guenfoud, Analyses of a composite functionally graded material beam with a new transverse shear deformation function , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Islam-Ncereddine El Ghoul, Ahmed Cheriet, Samir Bensaid, Ala-Eddine Lakhdari, FVM model and virtual instrument based system for electromagnetic characterization of steel material , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Ahmed Bensalem, Mekki Mellas, Valorization of Vase Dam by the addition of the cement kiln Dust (CKD , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Lamine Baci, Zakaria Boumerzoug, Claude Esnouf, Study of texture and recrystallization in commercial pure copper wire with and without heat treatment , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Hassiba Belaribi, Mekki Mellas, Using mathematical models and artificial neural networks for predicting the compressive strength of concrete with steel fibers exposed to high temperatures , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Mohamed-Amine Khadraoui, Leila Sriti, Study and optimization of the windows’ impact on thermal comfort and energy efficiency (Case of offices in a hot and arid climate) , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Ouassila Bahloul, Khelifa Abbeche, Azeddine Bahloul, Study of the microstructure of collapsible soil treated with the potassium chloride , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Sihem Latreche, Leila Sriti, Improving thermal comfort conditions through the optimization of the self-product residential buildings envelope. Case of a region with a hot and arid climate: Biskra , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
You may also start an advanced similarity search for this article.