Thermal design of air cooled condenser of a solar adsorption refrigerator
DOI:
https://doi.org/10.69717/jaest.v2.i1.25Keywords:
Solar adsorption refrigerator, Condenser, LMTD, Sizing, Free convection, Forced convectionAbstract
The objective of this paper is to study the design of a condenser of a solar adsorptionrefrigerator which will be tested in the region of Biskra (Algeria). The LMTD (log mean temperaturedifference) method is used to calculate the size of the condenser applying experimental dataobtained from the literature. For this purpose, a calculation code has been developed todetermine the total heat transfer area of the heat exchanger. Therefore, we present a comparisonbetween calculated and experimental results obtained from the literature. This comparisonallowed the validation of the calculation method by applying the same experimental conditions.The discussion of the results indicates that we cannot use the ambient air in free convection modeas a cooling fluid if its temperature exceeds 30°C. This problem presents the greatest obstacleespecially in the Saharan regions, such as in Biskra, where the average ambient air temperatureduring the summer exceeds 35°C. As a solution, we propose in this article the improvement of theheat transfer by the air-forced convection mode. Thus, it is established that the use of the air fancan extend the operating temperature limits of the condenser above 35°C.
Downloads
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright and Licensing Terms
Journal of Applied Engineering Science and Technology (JAEST)
Effective September 2026, JAEST adopted the Creative Commons Attribution 4.0 International License (CC BY 4.0) for newly published articles.
Under this license, readers may share, distribute, reproduce, adapt, and reuse published articles, including for commercial purposes, provided that appropriate credit is given to the original authors, the license is linked, and any changes are indicated.
Authors retain copyright of their work and grant JAEST the right of first publication.
Current Publication License: CC BY 4.0
Note on previously published articles: Articles published before September 2026 remain subject to their originally applicable licensing and copyright terms unless a change has been authorized by the respective rights holders. The current CC BY 4.0 policy does not automatically relicense previously published content.
For complete information, consult the JAEST Open Access Statement .
