DOI:
https://doi.org/10.69717/jaest.v3.i1.46Keywords:
Bearing capacity, Shallow footing, Non‐homogeneous clay, Undrained strength, InterferenceAbstract
The present study investigates the influence of linear increase of cohesion with depth onthe bearing capacity of shallow strip and circular footings. The objective of this study is theelastoplastic analysis of the bearing capacity factors and correction factors in order to indicate themodifications that must be made to the bearing capacity of smooth and rough strip footings, totake into account the case of circular footing on non‐homogeneous clay. Normal stresses andfailure mechanisms below the strip and circular footings are also examined. In addition, someinteresting results are presented concerning the interference of two strip footings. The comparisonof the numerical results of the present study with those presented in the literature confirms thecapability of the adopted approach.
Downloads
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Hicham Mokhbi, Mekki Mellas, Abdelhak Mabrouki, Jean‐Michel Pereira, Numerical study of a vertical pullout capacity of strip anchor plate on a frictional soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Hassiba Belaribi, Mekki Mellas, Using mathematical models and artificial neural networks for predicting the compressive strength of concrete with steel fibers exposed to high temperatures , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Ahmed Bensalem, Mekki Mellas, Valorization of Vase Dam by the addition of the cement kiln Dust (CKD , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Abla Femmam, Abdelhak Mabrouki, Mekki Mellas, Numerical study of the bearing capacity of a strip footing on tow layered clay under inclined loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Issam Abdesslam, Mekki Mellas, Pushover analysis of the reinforced concrete frames with soft first storey using a fiber hinge model , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Ouassim Rahmouni, Abdelhak Mabrouki, Djamel Benmeddour, Mekki Mellas, Numerical study of geogrid-reinforced segmental earth retaining wall , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Salah Zerguine, Djamel Benmeddour, Abdallah Zatar, Numerical study of seismic earth pressures acting against a vertical retaining wall in frictional soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Mohamed Labed, Mekki Mellas, Stability of geosynthetic reinforced embankments over stone column‐improved soft soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Salah Zerguine, Djamel Benmeddour, Abdelhak Mabrouki, Bearing capacity of a strip footing on a geosynthetic reinforced soil modular block walls after a seismic loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
Similar Articles
- Abla Femmam, Abdelhak Mabrouki, Mekki Mellas, Numerical study of the bearing capacity of a strip footing on tow layered clay under inclined loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Salah Zerguine, Djamel Benmeddour, Abdelhak Mabrouki, Bearing capacity of a strip footing on a geosynthetic reinforced soil modular block walls after a seismic loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Sadok Benmebarek, Ahlem Guetari, Mohamed-Saddek Remadna, Effect of the eccentric load on the bearing capacity of a strip footing founded on sand , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Hadj Bekki, Brahim Tali, Jean Canou, Jean-Claude Dupla, Ali Bouafia, Influence of the cyclic loading of very large number of cycles on the pile capacity , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Hadj Bekki, Behavior of Soil-structure interfaces under cyclic loading for large numbers of cycles: Application to piles , Journal of Applied Engineering Science & Technology: Vol. 1 No. 1 (2014): JAEST
- Mohamed Khemissa, Abdelkrim Mahamedi, Lakhdar Mekki, Problematic soil mechanics in the Algerian arid and semi-arid regions: Case of M’sila expansive clays , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Hassiba Belaribi, Mekki Mellas, Using mathematical models and artificial neural networks for predicting the compressive strength of concrete with steel fibers exposed to high temperatures , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Karima Gadri, Abdelhamid Guettala, Study of the adaptation of the sand concrete as repair material associated with an ordinary concrete substrate , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Hicham Mokhbi, Mekki Mellas, Abdelhak Mabrouki, Jean‐Michel Pereira, Numerical study of a vertical pullout capacity of strip anchor plate on a frictional soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Pierre Delage, Hamza Menaceur, Malik Belmokhtar, Jean Talandier, Effect of a partial saturation on the hydromechanical response of a clay rock , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
You may also start an advanced similarity search for this article.