DOI:
https://doi.org/10.69717/jaest.v2.i2.41Keywords:
Geosynthetic, Stone column, Finite difference, Stability, Factor of safety, EmbankmentAbstract
The stability of embankments on soft soils is a common problem; the reinforcement ofthis type of soil by a geosynthetic sheet above stone columns is a recent technique, for anexcellent distribution of the vertical stresses on the stone columns and the soft soils. This paperfocuses on the numerical analysis of a geosynthetic‐reinforced embankment over stone column‐improved soft soil. The finite difference code Fast Lagrangian Analysis of Continua in 3 Dimensions(FLAC3D) was used to determine the optimal placement of the geosynthetic sheet. Theembankment fill, the subsoil, and the stone columns were modeled by an elasto‐plastic model witha Mohr‐Coulomb yield criterion and associated flow rule. In this study, several geometrical andmechanical parameters have been considered, such as the stiffness modulus, the placement ofgeosynthetic sheet, and the internal friction angle of the embankment fill. The factor of safetyobtained by 3D numerical method was compared with those obtained by 2D numerical methods.The results of this study show the effect of the placement and stiffness of the geosynthetic sheeton the factor of safety.
Downloads
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Hassiba Belaribi, Mekki Mellas, Using mathematical models and artificial neural networks for predicting the compressive strength of concrete with steel fibers exposed to high temperatures , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Hicham Mokhbi, Mekki Mellas, Abdelhak Mabrouki, Jean‐Michel Pereira, Numerical study of a vertical pullout capacity of strip anchor plate on a frictional soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Ahmed Bensalem, Mekki Mellas, Valorization of Vase Dam by the addition of the cement kiln Dust (CKD , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Abla Femmam, Abdelhak Mabrouki, Mekki Mellas, Numerical study of the bearing capacity of a strip footing on tow layered clay under inclined loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Issam Abdesslam, Mekki Mellas, Pushover analysis of the reinforced concrete frames with soft first storey using a fiber hinge model , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Ouassim Rahmouni, Abdelhak Mabrouki, Djamel Benmeddour, Mekki Mellas, Numerical study of geogrid-reinforced segmental earth retaining wall , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Mohamed‐Younes Ouahab, Abdelhak Mabrouki, Mekki Mellas, Djamel Benmeddour, Numerical study of the bearing capacity for strip and circular footings on non‐ homogeneous clay , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
Similar Articles
- Islam-Ncereddine El Ghoul, Ahmed Cheriet, Samir Bensaid, Ala-Eddine Lakhdari, FVM model and virtual instrument based system for electromagnetic characterization of steel material , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Salah Zerguine, Djamel Benmeddour, Abdallah Zatar, Numerical study of seismic earth pressures acting against a vertical retaining wall in frictional soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Djamel Taibi, Stability analysis of the extended Kalman filter for Permanent Magnet Synchronous Motor , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Mohamed Rezig, Kamel Srairi, Mouloud Feliachi, Lotfi Alloui, New designs systems for induction cooking devices for heating performances improving , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Nadia Femmam, Said Mazouz, Analysis of legibility in urban public spaces. Case of El-Alia North-East neighborhood in Biskra, Algeria , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Oussama Temami, Djamal Hamadi, Abdallah Zatar, Ashraf Ayoub, Experimental and numerical analyses of a thin cylindrical shell model , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Loubna Ben Amor, Ahmed Boutarfaia, Omar Bentouila, Effects of Zr/Ti ratio and sintering temperature on Structural and electrical properties of PFN-PNN-PZTceramics near the morphotropic phase boundary , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Miloud Zellouf, Noureddine Moummi, Adnane Labed, Kamel Aoues, Multiple solutions for flow mode−transition in an inclined cavity generated by natural convection , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Sara Sedira, Said Mazouz, Effect of urban morphology on thermal comfort in outdoor spaces: the case of the red village-El Kantara-Biskra , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Mohamed-Amine Khadraoui, Leila Sriti, Study and optimization of the windows’ impact on thermal comfort and energy efficiency (Case of offices in a hot and arid climate) , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
You may also start an advanced similarity search for this article.