DOI:
https://doi.org/10.69717/jaest.v2.i2.41Keywords:
Geosynthetic, Stone column, Finite difference, Stability, Factor of safety, EmbankmentAbstract
The stability of embankments on soft soils is a common problem; the reinforcement ofthis type of soil by a geosynthetic sheet above stone columns is a recent technique, for anexcellent distribution of the vertical stresses on the stone columns and the soft soils. This paperfocuses on the numerical analysis of a geosynthetic‐reinforced embankment over stone column‐improved soft soil. The finite difference code Fast Lagrangian Analysis of Continua in 3 Dimensions(FLAC3D) was used to determine the optimal placement of the geosynthetic sheet. Theembankment fill, the subsoil, and the stone columns were modeled by an elasto‐plastic model witha Mohr‐Coulomb yield criterion and associated flow rule. In this study, several geometrical andmechanical parameters have been considered, such as the stiffness modulus, the placement ofgeosynthetic sheet, and the internal friction angle of the embankment fill. The factor of safetyobtained by 3D numerical method was compared with those obtained by 2D numerical methods.The results of this study show the effect of the placement and stiffness of the geosynthetic sheeton the factor of safety.
Downloads
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Hicham Mokhbi, Mekki Mellas, Abdelhak Mabrouki, Jean‐Michel Pereira, Numerical study of a vertical pullout capacity of strip anchor plate on a frictional soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Hassiba Belaribi, Mekki Mellas, Using mathematical models and artificial neural networks for predicting the compressive strength of concrete with steel fibers exposed to high temperatures , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Ahmed Bensalem, Mekki Mellas, Valorization of Vase Dam by the addition of the cement kiln Dust (CKD , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Issam Abdesslam, Mekki Mellas, Pushover analysis of the reinforced concrete frames with soft first storey using a fiber hinge model , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Abla Femmam, Abdelhak Mabrouki, Mekki Mellas, Numerical study of the bearing capacity of a strip footing on tow layered clay under inclined loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Ouassim Rahmouni, Abdelhak Mabrouki, Djamel Benmeddour, Mekki Mellas, Numerical study of geogrid-reinforced segmental earth retaining wall , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Mohamed‐Younes Ouahab, Abdelhak Mabrouki, Mekki Mellas, Djamel Benmeddour, Numerical study of the bearing capacity for strip and circular footings on non‐ homogeneous clay , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
Similar Articles
- Ismail Meghezzi-Larafi, Abdelouahab Tati, The effective length estimation of columns in semi-rigid jointed braced frames , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Abla Femmam, Abdelhak Mabrouki, Mekki Mellas, Numerical study of the bearing capacity of a strip footing on tow layered clay under inclined loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Hamza Djeffal, Mohamed Nadir Amrane, Numerical modeling of the prestressing losses in prestressed concrete beams by modal analysis method , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Abdelmadjid Meftah, Naïma Benmebarek, Sadok Benmebarek, Numerical study of the active earth pressure distribution on cylindrical shafts using 2D finite difference code , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Hicham Mokhbi, Mekki Mellas, Abdelhak Mabrouki, Jean‐Michel Pereira, Numerical study of a vertical pullout capacity of strip anchor plate on a frictional soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Mohamed Baheddi, Youcef Youb, Study of the behavior of bridges under seismic loads considering soil-structure interaction , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Hamza Guenfoud, Hassina Ziou, Mohamed Himeur, Mohamed Guenfoud, Analyses of a composite functionally graded material beam with a new transverse shear deformation function , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Abdelmaek Hasseine, Imane Bechka, Menwer Attarakih, Hans-Jöerg Bart, Applications of He’s methods to the steady-state population balance equation in continuous flow systems , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Houdayfa Ounis, Mohamed-Ouejdi Belarbi, On the thermal buckling behaviour of laminated composite plates with cut-outs , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Salah Zerguine, Djamel Benmeddour, Abdelhak Mabrouki, Bearing capacity of a strip footing on a geosynthetic reinforced soil modular block walls after a seismic loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
You may also start an advanced similarity search for this article.