DOI:
https://doi.org/10.69717/jaest.v4.i1.63Keywords:
Reinforced wall, Strip footing, seismic loading, modular block, Bearing capacityAbstract
Geosynthetic reinforced walls are widely used in public works. The aim of this paper isto study the bearing capacity of a strip rough footing on a geosynthetic reinforced soil modularblock walls, after a seismic action. The numerical modelling was carried out by using the finiteelement method implemented in the Plaxis code. The influence of the eccentric vertical load onthe bearing capacity of footing was examined considering different distances between the top ofthe wall and the edge of the footing. The results of this study confirm that the seismic loadingdoes not affect the bearing capacity when the distance d/B is greater than 10.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Hicham Mokhbi, Mekki Mellas, Abdelhak Mabrouki, Jean‐Michel Pereira, Numerical study of a vertical pullout capacity of strip anchor plate on a frictional soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Abla Femmam, Abdelhak Mabrouki, Mekki Mellas, Numerical study of the bearing capacity of a strip footing on tow layered clay under inclined loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Ouassim Rahmouni, Abdelhak Mabrouki, Djamel Benmeddour, Mekki Mellas, Numerical study of geogrid-reinforced segmental earth retaining wall , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Salah Zerguine, Djamel Benmeddour, Abdallah Zatar, Numerical study of seismic earth pressures acting against a vertical retaining wall in frictional soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Mohamed‐Younes Ouahab, Abdelhak Mabrouki, Mekki Mellas, Djamel Benmeddour, Numerical study of the bearing capacity for strip and circular footings on non‐ homogeneous clay , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
Similar Articles
- Mohamed Baheddi, Youcef Youb, Study of the behavior of bridges under seismic loads considering soil-structure interaction , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Wafa Bentrah, Salim Sbaa, Nadjiba Terki, Noureddine Bessous, A new frequency analysis for diagnosis of bearing defects in induction motors using the adaptive lifting scheme of wavelet transforms , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Salah Messast, Numerical modeling of the face reinforcement of Djebel El-Kantour tunnel face (highway east-west) , Journal of Applied Engineering Science & Technology: Vol. 1 No. 1 (2014): JAEST
- Toufik Mezerdi, Azeddine Belakehal, Amar Bennadji, Evaluation of the luminous and thermal comfort in a 'transparent' office space with single and double-glazing under a sunny clear sky , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Mohamed Labed, Mekki Mellas, Stability of geosynthetic reinforced embankments over stone column‐improved soft soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Salima Rezig, Ahmed Bouaziz, Abdallah Zatar, Experimental investigation on the optimal formulation of dune sand concrete reinforced with date palm fibers , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Adnane Labed, Amar Rouag, Adel Benchabane, Noureddine Moummi, Mohammed Zerouali, Applicability of solar desiccant cooling systems in Algerian Sahara: Experimental investigation of flat plate collectors , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Sadok Feia, Xavier Clain, Jean Canou, Jean Sulem, Siavash Ghabezloo, Fine particles production in sand under triaxial compression , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Oussama Temami, Djamal Hamadi, Abdallah Zatar, Ashraf Ayoub, Experimental and numerical analyses of a thin cylindrical shell model , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Mohamed Khemissa, Abdelkrim Mahamedi, Lakhdar Mekki, Problematic soil mechanics in the Algerian arid and semi-arid regions: Case of M’sila expansive clays , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
You may also start an advanced similarity search for this article.