DOI:
https://doi.org/10.69717/jaest.v3.i1.45Keywords:
Triaxial test, Granular materials, Grain breakage, Fine particlesAbstract
An experimental study, carried out in laboratory using a triaxial apparatus, proposes toevaluate the influence of grain size, grain shape and confining stress in fine particles production insand specimen subjected to triaxial loading. 16 triaxial tests were conducted on specimens of aninitial density index of 0.90 using the pluviation technique, with three different sands and underinitial confining pressure of 100, 400, 800 and 1200 kPa. The experimental results show that thefine particles production is considerably affected by confining stresses, even at low values (100kPa), and also by grain geometry. The experimental results show also that the fine particlesproduction increase with the strain level during the shearing test.
Downloads
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Hadj Bekki, Brahim Tali, Jean Canou, Jean-Claude Dupla, Ali Bouafia, Influence of the cyclic loading of very large number of cycles on the pile capacity , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
Similar Articles
- Farid Touloum, Akli Younsi, Abdelhak Kaci, Adel Benchabane, Formulation of a composite of date palm wood‐cement , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Abdelmaek Hasseine, Imane Bechka, Menwer Attarakih, Hans-Jöerg Bart, Applications of He’s methods to the steady-state population balance equation in continuous flow systems , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Djemai Hocine, Hecini Mabrouk, Adnane Labed, On the characterization of sandwich panels for solar flat plate collectors’ applications: theoretical and experimental investigation , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Oussama Temami, Djamal Hamadi, Abdallah Zatar, Ashraf Ayoub, Experimental and numerical analyses of a thin cylindrical shell model , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- benaichi06@yahoo.fr, Bouzidi Mezghiche, Effects of active mineral additions on the concrete behavior based on demolition sands , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Ouassila Bahloul, Khelifa Abbeche, Azeddine Bahloul, Study of the microstructure of collapsible soil treated with the potassium chloride , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Adnane Labed, Amar Rouag, Adel Benchabane, Noureddine Moummi, Mohammed Zerouali, Applicability of solar desiccant cooling systems in Algerian Sahara: Experimental investigation of flat plate collectors , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Karima Gadri, Abdelhamid Guettala, Study of the adaptation of the sand concrete as repair material associated with an ordinary concrete substrate , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Houdayfa Ounis, Mohamed-Ouejdi Belarbi, On the thermal buckling behaviour of laminated composite plates with cut-outs , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Sihem Latreche, Leila Sriti, Improving thermal comfort conditions through the optimization of the self-product residential buildings envelope. Case of a region with a hot and arid climate: Biskra , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
You may also start an advanced similarity search for this article.