DOI:
https://doi.org/10.69717/jaest.v1.i2.34Keywords:
Geogrid, Interface, Reinforcement, Numerical modelling, Segmental retaining wallAbstract
Geogrid-reinforced soil segmental retaining walls have gained wide popularity because of their ease of installation and quick construction. This paper focuses on the numerical analysis using the FLAC3D (Fast Lagrangian Analysis of Continua in 3 Dimensions), the influence of the inclined blocs on the behavior of geogrid-reinforced soil segmental retaining walls. The results show that the inclination of the segmental blocks influences the shear stress transmitted to the blocks, the lateral displacement, the tensile loads and the strains in the geogrid layers.
Downloads
Download data is not yet available.
Downloads
Published
2015-02-28
Issue
Section
Research Paper
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Numerical study of geogrid-reinforced segmental earth retaining wall . (2015). Journal of Applied Engineering Science & Technology, 1(2). https://doi.org/10.69717/jaest.v1.i2.34
Most read articles by the same author(s)
- Hicham Mokhbi, Mekki Mellas, Abdelhak Mabrouki, Jean‐Michel Pereira, Numerical study of a vertical pullout capacity of strip anchor plate on a frictional soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Hassiba Belaribi, Mekki Mellas, Using mathematical models and artificial neural networks for predicting the compressive strength of concrete with steel fibers exposed to high temperatures , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Ahmed Bensalem, Mekki Mellas, Valorization of Vase Dam by the addition of the cement kiln Dust (CKD , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Abla Femmam, Abdelhak Mabrouki, Mekki Mellas, Numerical study of the bearing capacity of a strip footing on tow layered clay under inclined loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Issam Abdesslam, Mekki Mellas, Pushover analysis of the reinforced concrete frames with soft first storey using a fiber hinge model , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Mohamed Labed, Mekki Mellas, Stability of geosynthetic reinforced embankments over stone column‐improved soft soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Salah Zerguine, Djamel Benmeddour, Abdallah Zatar, Numerical study of seismic earth pressures acting against a vertical retaining wall in frictional soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Salah Zerguine, Djamel Benmeddour, Abdelhak Mabrouki, Bearing capacity of a strip footing on a geosynthetic reinforced soil modular block walls after a seismic loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Mohamed‐Younes Ouahab, Abdelhak Mabrouki, Mekki Mellas, Djamel Benmeddour, Numerical study of the bearing capacity for strip and circular footings on non‐ homogeneous clay , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
Similar Articles
- Meriem Madhoui-Benchikha, Djamel Alkama, Thermal performance of the horizontal opening in the traditional houses of old Biskra. Case of traditional house at Bab Edarb , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Hamza Guenfoud, Hassina Ziou, Mohamed Himeur, Mohamed Guenfoud, Analyses of a composite functionally graded material beam with a new transverse shear deformation function , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Abdelmaek Hasseine, Imane Bechka, Menwer Attarakih, Hans-Jöerg Bart, Applications of He’s methods to the steady-state population balance equation in continuous flow systems , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Miloud Zellouf, Noureddine Moummi, Adnane Labed, Kamel Aoues, Multiple solutions for flow mode−transition in an inclined cavity generated by natural convection , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Rafia Hassani, Mohamed Boumehraz, Maroua Hamzi, Zineb Habba, Gyro-Accelerometer based Control of an Intelligent Wheelchair , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Said Khoudiri, Fateh Benchabane, Khaled Yahia, Nonlinear control of a grid connected hybrid energetic systems (HES) based on photovoltaic- fuel cells distributed power generation systems , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Djihed Berkouk, Said Mazouz, Numerical study of the horizontal shading devices effect on the thermal performance of promotional apartments: Case of El-Alia-Biskra , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Mohamed Baheddi, Youcef Youb, Study of the behavior of bridges under seismic loads considering soil-structure interaction , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Sabiha Aklouche‐Benouaguef, Belkacem Zeghmati, Bifurcations in two‐dimensional differentially heated cavity , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Sihem Latreche, Leila Sriti, Improving thermal comfort conditions through the optimization of the self-product residential buildings envelope. Case of a region with a hot and arid climate: Biskra , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
Previous
21-30 of 30
You may also start an advanced similarity search for this article.