A review of thermo-mechanical behavior of lightweight concrete based on recycled plastic waste aggregates
View 45/
16
0
DOI:
https://doi.org/10.69717/jaest.v6.i3.198Keywords:
Ethylene vinyl acetate, Concrete , EVA waste, Sustainable Lightweight concrete, Thermo-mechanical properties, AggregatesAbstract
The rapid growth of the construction sector has driven researchers to develop innovative, environmentally friendly strategies. One such strategy is the incorporation of waste plastics into concrete production, which both enhances certain concrete properties and provides a viable approach for plastic waste valorization. Ethylene vinyl acetate (EVA) copolymer is a thermoplastic that has attracted growing research interest due to its flexibility, durability, and favorable thermal properties. In recent years, several studies have investigated the use of EVA waste aggregates in structural lightweight concrete. This study aims to synthesize the existing research on the use of EVA waste aggregates in concrete, providing a general overview of development in EVA waste aggregates concrete and examining its thermo-mechanical behavior in the hardened state. Results indicate that the partial replacement of natural aggregates with EVA waste improves thermal insulation performance, as demonstrated by a reduction in thermal conductivity. However, this improvement is accompanied by a reduction in mechanical performance, including flexural and compressive strengths. Overall, these results confirm that EVA waste aggregates can be used to produce lightweight concrete suitable for semi-structural application.
Highlights
- Recycled EVA footwear waste is evaluated as lightweight concrete aggregates.
- EVA aggregates significantly improve the thermal insulation of concrete.
- The review highlights the trade-off between thermal and mechanical properties.
- Using plastic waste in concrete promotes circular economy and sustainability.
Downloads
References
Y.H.M. Amran, R. Alyousef, H. Alabduljabbar, M. El-Zeadani, Clean production and properties of geopolymer concrete: A review, Journal of Cleaner Production 251 (2020) 119679. https://doi.org/10.1016/j.jclepro.2019.119679
H. Tantawi, Introduction to Concrete Technology, Department of Civil Engineering, Fahad Bin Sultan University, 2015. https://doi.org/10.13140/RG.2.1.3219.9201
X. Wen, A.M. Pagcaliwagan, H. Hou, X. Yin, Advancements in self-healing concrete: Material mechanisms, durability assessment, and implications for infrastructure lifecycle management, Alexandria Engineering Journal 131 (2025) 104–124. https://doi.org/10.1016/j.aej.2025.10.011
R.H. Faraj, A.F.H. Sherwani, A. Daraei, Mechanical, fracture and durability properties of self-compacting high strength concrete containing recycled polypropylene plastic particles, Journal of Building Engineering 25 (2019) 100808. https://doi.org/10.1016/j.jobe.2019.100808
B. Bhardwaj, P. Kumar, Waste foundry sand in concrete: A review, Construction and Building Materials 156 (2017) 661–674. https://doi.org/10.1016/j.conbuildmat.2017.09.010
C.K.A. Uche, S.A. Abubakar, S.N. Nnamchi, K.J. Ukagwu, Polyethylene terephthalate aggregates in structural lightweight concrete: A meta-analysis and review, Discover Materials 3 (2023) 24. https://doi.org/10.1007/s43939-023-00060-8
Y.A. Hajam, R. Kumar, A. Kumar, Environmental waste management strategies and vermi transformation for sustainable development, Environmental Challenges 13 (2023) 100747. https://doi.org/10.1016/j.envc.2023.100747
M.C. Baptista, M. Da Luz Garcia, S.C. Pinho, M. Ascensão Lopes, M.F. Almeida, C. Coelho, C. Fonseca, Valorization of EVA waste from footwear industry as natural aggregates substitutes in mortar: The effect of granulometry, Journal of Material Cycles and Waste Management 23 (2021) 1445–1455. https://doi.org/10.1007/s10163-021-01222-7
B. Haba, S. Djellali, Y. Abdelouahed, S. Boudjelida, F. Faleschini, M. Carraro, Transforming plastic waste into value: A review of management strategies and innovative applications in sustainable construction, Polymers 17 (2025) 881. https://doi.org/10.3390/polym17070881
H. Altawaiha, A review on the utilization of E-plastic waste in concrete production: A step towards sustainability, Journal of Building Pathology and Rehabilitation 9 (2024) 131. https://doi.org/10.1007/s41024-024-00486-4
E. Meglio, A. Davino, A. Formisano, Experimental tests on lightweight cement mortar and concrete with recycled plastic wastes, Buildings 13 (2023) 1181. https://doi.org/10.3390/buildings13051181
T.Y. Shin, Y.H. Kim, C.B. Park, J.H. Kim, Quantitative evaluation on the pumpability of lightweight aggregate concrete by a full-scale pumping test, Case Studies in Construction Materials 16 (2022) e01075. https://doi.org/10.1016/j.cscm.2022.e01075
E.Q.R. Santiago, P.R.L. Lima, M.B. Leite, R.D. Toledo Filho, Mechanical behavior of recycled lightweight concrete using EVA waste and CDW under moderate temperature, Revista IBRACON de Estruturas e Materiais (2009) 211–221. https://doi.org/10.1590/S1983-41952009000300001
R. Siddique, J. Khatib, I. Kaur, Use of recycled plastic in concrete: A review, Waste Management 28 (2008) 1835–1852. https://doi.org/10.1016/j.wasman.2007.09.011
O. Ünal, T. Uygunoğlu, A. Yildiz, Investigation of properties of low-strength lightweight concrete for thermal insulation, Building and Environment 42 (2007) 584–590. https://doi.org/10.1016/j.buildenv.2005.09.024
N. Dulsang, P. Kasemsiri, P. Posi, S. Hiziroglu, P. Chindaprasirt, Characterization of an environment friendly lightweight concrete containing ethyl vinyl acetate waste, Materials & Design 96 (2016) 350–356. https://doi.org/10.1016/j.matdes.2016.02.037
R.O. Machado, L.C.K.M. Pereira, E.B. Zanelato, A.L.F. Manhães, A.R.G. Azevedo, M.T. Marvila, J. Alexandre, S.N. Monteiro, L.T. Petrucci, Incorporation of EVA residue for production of lightweight concrete, in: Characterization of Minerals, Metals, and Materials, Springer, 2019, pp. 673–681. https://doi.org/10.1007/978-3-030-05749-7_67
P.R.L. Lima, M.B. Leite, E.Q.R. Santiago, Recycled lightweight concrete made from footwear industry waste and CDW, Waste Management 30 (2010) 1107–1113. https://doi.org/10.1016/j.wasman.2010.02.007
V. Gregorova, M. Ledererova, Z. Stefunkova, Investigation of influence of recycled plastics from cable, ethylene vinyl acetate and polystyrene waste on lightweight concrete properties, Procedia Engineering 195 (2017) 127–133. https://doi.org/10.1016/j.proeng.2017.04.534
R. Shahin, T. S. [verify full surname], G. C. [verify full surname], Recycling of Footwear Products, Position Paper, Centre for Sustainable Manufacturing and Reuse/Recycling Technologies (SMART), Loughborough University, 2007.
J.J. Andersen, Footwear Production Statistics, RunRepeat, 2023. https://runrepeat.com/footwear-production-statistics
European Commission, Demonstration of a new business and consumption model for the circular economy in the footwear sector (LIFE KANNAGreen), LIFE Public Database.
V. Balagopal, J.P. Raju, A.A. Kumar, M. Sajeev, P. Veena, Effect of ethylene vinyl acetate on cement mortar: A review, Materials Today:
Proceedings (2023). https://doi.org/10.1016/j.matpr.2023.03.692
S. Sasi, P. Joseph, R. Haigh, M. Sandanayake, Z. Vrcelj, E. Yaghoubi, A review on the effects of waste textile polymer fiber on concrete strength: Exploring the key parameters, Buildings 14 (2024) 1486. https://doi.org/10.3390/buildings14051486
V. Gregorova, S. Uncik, Characterization of lightweight concrete produced from plastics waste—Polystyrene and EVA, Applied Mechanics and Materials 861 (2016) 24–31. https://doi.org/10.4028/www.scientific.net/AMM.861.24
R. Siddique, J. Khatib, I. Kaur, Use of recycled plastic in concrete: A review, Waste Management 28 (2008) 1835–1852. https://doi.org/10.1016/j.wasman.2007.09.011
Z.Z. Ismail, E.A. Al-Hashmi, Use of waste plastic in concrete mixture as aggregate replacement, Waste Management 28 (2008) 2041–2047. https://doi.org/10.1016/j.wasman.2007.08.023
P. Sukontasukkul, Use of crumb rubber to improve thermal and sound properties of pre-cast concrete panel, Construction and Building Materials 23 (2009) 1084–1092. https://doi.org/10.1016/j.conbuildmat.2008.05.021
S.I. Basha, M.R. Ali, S.U. Al-Dulaijan, M. Maslehuddin, Mechanical and thermal properties of lightweight recycled plastic aggregate concrete, Journal of Building Engineering 32 (2020) 101710. https://doi.org/10.1016/j.jobe.2020.101710
Published
Issue
Section
License
Copyright (c) 2026 Djahida Cherrallah , Kamal Abdelli (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The Journal of Applied Engineering Science and Technology (JAEST) provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
All articles published in JAEST are licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This license permits users to share, copy, redistribute, adapt, and reproduce the published material in any medium or format, including for commercial purposes, provided that appropriate credit is given to the original author(s) and source, a link to the license is provided, and any changes made are indicated.
Authors retain the copyright of their published work and grant JAEST the right of first publication. Copyright is not transferred to the journal or publisher.
License: Creative Commons Attribution 4.0 International (CC BY 4.0)
License URL: Creative Commons CC BY 4.0
