Improving thermal comfort conditions through the optimization of the self-product residential buildings envelope. Case of a region with a hot and arid climate: Biskra
DOI:
https://doi.org/10.69717/jaest.v4.i2.91Keywords:
Architectural envelope, Thermal comfort, Materials, Self-product Individual housing, Hot and arid climate, BiskraAbstract
To improve the thermal comfort conditions of the occupants in the individual housingand to reduce the energy consumption induced by the heating and cooling needs in the building, itis necessary to act on the main element which controls the heat exchanges with the environment:the envelope. This refers to the building’s outer skin that consisting of vertical opaque components(the walls ...), horizontal ones (roof ...) and various opening devices. The thermal performance ofthe envelope is mainly due to its geometrical and formal attributes, but the material characteristicsof its components remain decisive for thermal exchanges with the environment. As part of thebuilding at the interface of the indoor ambiances and the outdoor environment, the envelope isoften the seat of a large number of heat exchange phenomena that affect not only the premisesenergy consumption but also the thermal comfort conditions of their occupants. This papersummarizes the main results obtained from an in-situ measurement campaign to evaluate thedesign parameters influencing the thermal comfort of self-produced individual housing relative tothe hot and arid climate of Biskra. In addition, a thermal simulation carried out with the TYRNSYS17 software has demonstrated the potential of improving the thermal comfort conditions of theself-produced individual housing thanks to adequate choices concerning the architectural andconstructive attributes of the envelope.
Downloads
Downloads
Published
Issue
Section
License
Copyright and Licensing Terms
Journal of Applied Engineering Science and Technology (JAEST)
Effective September 2026, JAEST adopted the Creative Commons Attribution 4.0 International License (CC BY 4.0) for newly published articles.
Under this license, readers may share, distribute, reproduce, adapt, and reuse published articles, including for commercial purposes, provided that appropriate credit is given to the original authors, the license is linked, and any changes are indicated.
Authors retain copyright of their work and grant JAEST the right of first publication.
Current Publication License: CC BY 4.0
Note on previously published articles: Articles published before September 2026 remain subject to their originally applicable licensing and copyright terms unless a change has been authorized by the respective rights holders. The current CC BY 4.0 policy does not automatically relicense previously published content.
For complete information, consult the JAEST Open Access Statement .
