DOI:
https://doi.org/10.69717/jaest.v4.i2.87Keywords:
Traditional architecture, horizontal opening, Raouzna, Hot and dry climate, Numerical simulation, Thermal performanceAbstract
This research aims to revive a traditional architecture heritage of Biskra, which is thehorizontal opening in the roof of the "wast edar" named “raouzna". In order to evaluate thethermal performance of this element and measure its ability to control the distribution of interiortemperature in a region submitted to a hot and dry climate, an experimental study by numericalsimulation was carried out. DEROB-LTH program was used to perform the work of simulationwhich focused on one set of constant and variable factors. These factors are related to climatedata, thermal’s comfort zone and to the dimensions and shape of the raouzna. Some of the dataused for the simulation are based on the results of a typo-morphological analysis of a corpus oftraditional houses and a survey carried out upstream in the quarter of Bab Edarb (old Biskra). Thestudy focuses on the comparison between the recorded temperature inside the traditional houseand the outside air, and for periods critical of winter and summer represented respectively by thecoldest month and hottest: January and July.
Downloads
Downloads
Published
Issue
Section
How to Cite
Similar Articles
- benaichi06@yahoo.fr, Bouzidi Mezghiche, Effects of active mineral additions on the concrete behavior based on demolition sands , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Djamel Taibi, Stability analysis of the extended Kalman filter for Permanent Magnet Synchronous Motor , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Dr. Abdelhak Mabrouki, Prof. Adel Benchaban, Editorial Preface of the Second Volume of JAEST , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Mohamed Boumehraz, Zineb Habba, Rafia Hassani, Vision Based Tracking and Interception of Moving Target by Mobile Robot Using Fuzzy Control , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Farid Touloum, Akli Younsi, Abdelhak Kaci, Adel Benchabane, Formulation of a composite of date palm wood‐cement , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Said Khoudiri, Fateh Benchabane, Khaled Yahia, Nonlinear control of a grid connected hybrid energetic systems (HES) based on photovoltaic- fuel cells distributed power generation systems , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Salah Zerguine, Djamel Benmeddour, Abdelhak Mabrouki, Bearing capacity of a strip footing on a geosynthetic reinforced soil modular block walls after a seismic loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Issam Abdesslam, Mekki Mellas, Pushover analysis of the reinforced concrete frames with soft first storey using a fiber hinge model , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Miloud Koussa, Mohamed-Tewfik Bouziane, Contribution of the geographic information system for groundwater to the mapping of subterranean waters in the region Djelfa (Algeria) , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Abla Femmam, Abdelhak Mabrouki, Mekki Mellas, Numerical study of the bearing capacity of a strip footing on tow layered clay under inclined loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
You may also start an advanced similarity search for this article.