DOI:
https://doi.org/10.69717/jaest.v1.i1.13Keywords:
Unsaturated soils, loess, collapse, laboratory, oedometerAbstract
Some periglacial loess deposits from Northern France are partially saturated thanks to the protection provided by an upper surface layer with higher clay content. When excavated and exposed to climatic changes, the loess deposit may exhibit collapse if their clay fraction is small enough and carbonate content high enough. These conditions allow for the stability of a loose porous microstructure with bonding links that are destroyed by water infiltration. In the paper, the origin and the properties of loess deposits from Northern France are described, together with the laboratory method of characterising collapse. Some practical conclusions are afterwards drawn.
Downloads
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Pierre Delage, Hamza Menaceur, Malik Belmokhtar, Jean Talandier, Effect of a partial saturation on the hydromechanical response of a clay rock , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
Similar Articles
- Ouassila Bahloul, Khelifa Abbeche, Azeddine Bahloul, Study of the microstructure of collapsible soil treated with the potassium chloride , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Mohamed Khemissa, Abdelkrim Mahamedi, Lakhdar Mekki, Problematic soil mechanics in the Algerian arid and semi-arid regions: Case of M’sila expansive clays , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Hamza Guenfoud, Hassina Ziou, Mohamed Himeur, Mohamed Guenfoud, Analyses of a composite functionally graded material beam with a new transverse shear deformation function , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Abdelmadjid Meftah, Naïma Benmebarek, Sadok Benmebarek, Numerical study of the active earth pressure distribution on cylindrical shafts using 2D finite difference code , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Mohamed Rezig, Kamel Srairi, Mouloud Feliachi, Lotfi Alloui, New designs systems for induction cooking devices for heating performances improving , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Saida Fedali, Hakim Madani, Cherif Bougriou, Prediction method of both azeotropic and critical points of the binary refrigerant mixtures , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Djamel Taibi, Stability analysis of the extended Kalman filter for Permanent Magnet Synchronous Motor , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Salim Abdesselam, Zine-Eddine Baarir, Three variants Particle Swarm Optimization technique for optimal cameras network two dimensions placement , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Abdelmaek Hasseine, Imane Bechka, Menwer Attarakih, Hans-Jöerg Bart, Applications of He’s methods to the steady-state population balance equation in continuous flow systems , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Mohamed Labed, Mekki Mellas, Stability of geosynthetic reinforced embankments over stone column‐improved soft soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
You may also start an advanced similarity search for this article.