DOI:
https://doi.org/10.69717/jaest.v3.i2.70Keywords:
Transparency, office work, hot and arid climate, double glazing, luminance, energy consumptionAbstract
The main objective of this study is to evaluate the light and thermal comfort in a 'transparent' office. This last term designates a working space whose outer wall is entirely glazed by a simple transparent glazing in a first case, and a transparent double glazing in a second case, in the context of arid environments with a hot and dry climate and therefore under the sky Bright sunny. Various solar protections are used for the case of simple glazing and the best performing among them is maintained for office simulations with double-glazing. The study was carried out using an experimental approach. Thus, computer simulations using ECOTECT and RADIANCE softwares were carried out for transparent desk models in order to evaluate: i) illuminance on the worktop ii) luminance in the field Visual, (iii) indoor air temperatures, (iv) and annual energy consumption. It was carried out for south-facing offices at a location with a latitude of 34.48° North and a longitude of 5.73° East. The evaluation of the results obtained is based on recommended reference values for the various simulated indicators. Based on the results obtained from natural light and thermal performance in a single-glazed transparent office, the cases tested were classified according to their degrees of performance in order to choose the optimal orientation for the case of south orientation. In this respect, one notes essentially the performance of the office whose facade is a curtain wall double transparent windows oriented South equipped with a system 'Light shelf'.
Downloads
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Sara Zineddine, Azeddine Belakehal, Amar Bennadji, Evaluation of the thermal environment in architecture hotel of Fernand Pouillon. Case of the Ziban Hotel in Biskra , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
Similar Articles
- Wafa Bentrah, Salim Sbaa, Nadjiba Terki, Noureddine Bessous, A new frequency analysis for diagnosis of bearing defects in induction motors using the adaptive lifting scheme of wavelet transforms , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Sabiha Aklouche‐Benouaguef, Belkacem Zeghmati, Bifurcations in two‐dimensional differentially heated cavity , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Hanane Rehali, Djamel Barkat, Extraction, synthesis and characterization of nickel (II) and cobalt (II) caprate complexes , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Djihed Berkouk, Said Mazouz, Numerical study of the horizontal shading devices effect on the thermal performance of promotional apartments: Case of El-Alia-Biskra , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Lamine Baci, Zakaria Boumerzoug, Claude Esnouf, Study of texture and recrystallization in commercial pure copper wire with and without heat treatment , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Said Khoudiri, Fateh Benchabane, Khaled Yahia, Nonlinear control of a grid connected hybrid energetic systems (HES) based on photovoltaic- fuel cells distributed power generation systems , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Abdelmalek Hasseine, Ahleme Aidaoui, Recovery of acetic acid from aqueous solutions using salting effect , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Nadia Femmam, Said Mazouz, Analysis of legibility in urban public spaces. Case of El-Alia North-East neighborhood in Biskra, Algeria , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Salim Abdesselam, Zine-Eddine Baarir, Three variants Particle Swarm Optimization technique for optimal cameras network two dimensions placement , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Loubna Ben Amor, Ahmed Boutarfaia, Omar Bentouila, Effects of Zr/Ti ratio and sintering temperature on Structural and electrical properties of PFN-PNN-PZTceramics near the morphotropic phase boundary , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
You may also start an advanced similarity search for this article.