DOI:
https://doi.org/10.69717/jaest.v3.i2.58Keywords:
Laminated plates, Thermal buckling, Cut-outs, Finite element methodAbstract
In this work, the thermal buckling behaviour of laminated plates with rectangular cut-outs is studied using the finite element method. Based upon the classical plate theory, the used finite element is a combination of a linear isoparametric membrane element and a high precision rectangular Hermitian element. After validating the results obtained by the finite element, a parametric study is made using three types of materials commonly used in the industry, namely: the T300/5208 Graphite/Epoxy, the AS4/3501-6 Graphite/Epoxy and the E-glass/Epoxy. The study was about the effect of the size of the cut-outs, the boundary conditions, the stacking sequence and the stress resultants distribution on the critical buckling temperature. The study showed that the critical buckling temperature is strongly affected by the discussed parameters.
Downloads
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Mohamed-Ouejdi Belarbi, Abdelouahab Tati, Abdelhak Khechai, Houdayfa Ounis, A new 4-node quadrilateral element based on layerwise approach for free vibration analysis of laminate-faced sandwich plates , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
Similar Articles
- Djihed Berkouk, Said Mazouz, Numerical study of the horizontal shading devices effect on the thermal performance of promotional apartments: Case of El-Alia-Biskra , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Abdelmaek Hasseine, Imane Bechka, Menwer Attarakih, Hans-Jöerg Bart, Applications of He’s methods to the steady-state population balance equation in continuous flow systems , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Toufik Mezerdi, Azeddine Belakehal, Amar Bennadji, Evaluation of the luminous and thermal comfort in a 'transparent' office space with single and double-glazing under a sunny clear sky , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Djemai Hocine, Hecini Mabrouk, Adnane Labed, On the characterization of sandwich panels for solar flat plate collectors’ applications: theoretical and experimental investigation , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Nadia Femmam, Said Mazouz, Analysis of legibility in urban public spaces. Case of El-Alia North-East neighborhood in Biskra, Algeria , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Hanane Rehali, Djamel Barkat, Extraction, synthesis and characterization of nickel (II) and cobalt (II) caprate complexes , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Saida Fedali, Hakim Madani, Cherif Bougriou, Prediction method of both azeotropic and critical points of the binary refrigerant mixtures , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Abdelmadjid Meftah, Naïma Benmebarek, Sadok Benmebarek, Numerical study of the active earth pressure distribution on cylindrical shafts using 2D finite difference code , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Issam Abdesslam, Mekki Mellas, Pushover analysis of the reinforced concrete frames with soft first storey using a fiber hinge model , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Amel Aidi, Djamel Barkat, Extraction liquide-liquide du cobalt(II) par la N-(2-hydroxybenzylidene) aniline , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
You may also start an advanced similarity search for this article.