DOI:
https://doi.org/10.69717/jaest.v2.i2.38Keywords:
Natural convection, inclined cavity, hysteresis phenomenon, flow mode transition, Sizing calculationsAbstract
An investigation of natural convection in a rectangular cavity (AR = 4) filled with air (Pr =
0.71) heated from the side with adiabatic horizontal walls is carried out numerically. To describe
the flow regime, we propose a description of the influence of the angle of inclination and Rayleigh
number on the flow patterns likely to develop in this configuration. The numerical analysis of the
governing equations of the problem is based on finite volume method with non‐staggered grids
arrangement and is solved through the iterative SIMPLEC algorithm. Results indicate that the angle
of inclination has a significant effect on flow mode transition. The existence of multi‐steady
solutions closely depends on the value of the Rayleigh number. For that the Hysteresis
phenomenon (multi−steady solutions) for Ra ≥ 2000 are demonstrated and parameter maps of Ra
vs. φ are proposed.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Amar Rouag, Adel Benchabane, Adnane Labed, Nora Boultif, Thermal design of air cooled condenser of a solar adsorption refrigerator , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Adnane Labed, Amar Rouag, Adel Benchabane, Noureddine Moummi, Mohammed Zerouali, Applicability of solar desiccant cooling systems in Algerian Sahara: Experimental investigation of flat plate collectors , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Hocine Benfatah, Adel Benchabane, Amar Rouag, Adnane Labed, Feasibility of solar adsorption air-conditioning in the region of Biskra: Reflection on the government support for electricity bills , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Djemai Hocine, Hecini Mabrouk, Adnane Labed, On the characterization of sandwich panels for solar flat plate collectors’ applications: theoretical and experimental investigation , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
Similar Articles
- Sabiha Aklouche‐Benouaguef, Belkacem Zeghmati, Bifurcations in two‐dimensional differentially heated cavity , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Amar Rouag, Adel Benchabane, Adnane Labed, Nora Boultif, Thermal design of air cooled condenser of a solar adsorption refrigerator , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Toufik Arrif1, Adel Benchabane, Abdelmadjid Chehhat, Abdelfetah Belaid, Amar Rouag, Numerical simulation of convective heat losses in a helical tube of a cylindrical solar receiver , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Said Khoudiri, Fateh Benchabane, Khaled Yahia, Nonlinear control of a grid connected hybrid energetic systems (HES) based on photovoltaic- fuel cells distributed power generation systems , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Abla Femmam, Abdelhak Mabrouki, Mekki Mellas, Numerical study of the bearing capacity of a strip footing on tow layered clay under inclined loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Abdelmaek Hasseine, Imane Bechka, Menwer Attarakih, Hans-Jöerg Bart, Applications of He’s methods to the steady-state population balance equation in continuous flow systems , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Rafia Hassani, Mohamed Boumehraz, Maroua Hamzi, Zineb Habba, Gyro-Accelerometer based Control of an Intelligent Wheelchair , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Salah Zerguine, Djamel Benmeddour, Abdallah Zatar, Numerical study of seismic earth pressures acting against a vertical retaining wall in frictional soil , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
- Adnane Labed, Amar Rouag, Adel Benchabane, Noureddine Moummi, Mohammed Zerouali, Applicability of solar desiccant cooling systems in Algerian Sahara: Experimental investigation of flat plate collectors , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Jean-Michel Pereira, Time effects in geomaterials , Journal of Applied Engineering Science & Technology: Vol. 1 No. 1 (2014): JAEST
You may also start an advanced similarity search for this article.