DOI:
https://doi.org/10.69717/jaest.v3.i2.58Keywords:
Laminated plates, Thermal buckling, Cut-outs, Finite element methodAbstract
In this work, the thermal buckling behaviour of laminated plates with rectangular cut-outs is studied using the finite element method. Based upon the classical plate theory, the used finite element is a combination of a linear isoparametric membrane element and a high precision rectangular Hermitian element. After validating the results obtained by the finite element, a parametric study is made using three types of materials commonly used in the industry, namely: the T300/5208 Graphite/Epoxy, the AS4/3501-6 Graphite/Epoxy and the E-glass/Epoxy. The study was about the effect of the size of the cut-outs, the boundary conditions, the stacking sequence and the stress resultants distribution on the critical buckling temperature. The study showed that the critical buckling temperature is strongly affected by the discussed parameters.
Downloads
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Mohamed-Ouejdi Belarbi, Abdelouahab Tati, Abdelhak Khechai, Houdayfa Ounis, A new 4-node quadrilateral element based on layerwise approach for free vibration analysis of laminate-faced sandwich plates , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
Similar Articles
- Farid Touloum, Akli Younsi, Abdelhak Kaci, Adel Benchabane, Formulation of a composite of date palm wood‐cement , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Sabiha Aklouche‐Benouaguef, Belkacem Zeghmati, Bifurcations in two‐dimensional differentially heated cavity , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Sadok Benmebarek, Ahlem Guetari, Mohamed-Saddek Remadna, Effect of the eccentric load on the bearing capacity of a strip footing founded on sand , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Abla Femmam, Abdelhak Mabrouki, Mekki Mellas, Numerical study of the bearing capacity of a strip footing on tow layered clay under inclined loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Wafa Bentrah, Salim Sbaa, Nadjiba Terki, Noureddine Bessous, A new frequency analysis for diagnosis of bearing defects in induction motors using the adaptive lifting scheme of wavelet transforms , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Hassiba Belaribi, Mekki Mellas, Using mathematical models and artificial neural networks for predicting the compressive strength of concrete with steel fibers exposed to high temperatures , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Salah Zerguine, Djamel Benmeddour, Abdelhak Mabrouki, Bearing capacity of a strip footing on a geosynthetic reinforced soil modular block walls after a seismic loading , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Amel Aidi, Djamel Barkat, Extraction liquide-liquide du cobalt(II) par la N-(2-hydroxybenzylidene) aniline , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Pierre Delage, Geotechnical problems due to the collapse of unsaturated soils: the case of loess from northern France , Journal of Applied Engineering Science & Technology: Vol. 1 No. 1 (2014): JAEST
You may also start an advanced similarity search for this article.