DOI:
https://doi.org/10.69717/jaest.v3.i1.50Keywords:
Critical point, Azeotropic point, Binary mixtures, Refrigerant, Equation of state, R134aAbstract
The prediction of the azeotropic point and the determination of the critical point inbinary mixtures is very important in refrigerating industry. In this task, a simple method ispresented in order to predict and determine both azeotropic and critical points. Our methodemploys experimental data and a thermodynamic model. 1,1,1,2‐tetrafluoroethane (R134a) in themixture presents the possibility of inventing the azeotropic and critical properties. The mixturesstudied in this work are: Cyclopropane (RC270), Propylene (R1270), Hexafluoroethane (R116) andCarbon dioxide (R744) based on 1,1,1,2‐tetrafluoroethane (R134a). The model consists of thePeng–Robinson equation of state (EoS), the Mathias–Copeman alph a function and the Wong‐Sandler mixing rules involving the NRTL model. The results proved that there is a good agreementbetween the predicted values and the experimental data. The presented methods are able topredict the azeotropic and determine critical positions.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Abdelmaek Hasseine, Imane Bechka, Menwer Attarakih, Hans-Jöerg Bart, Applications of He’s methods to the steady-state population balance equation in continuous flow systems , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Hocine Benfatah, Adel Benchabane, Amar Rouag, Adnane Labed, Feasibility of solar adsorption air-conditioning in the region of Biskra: Reflection on the government support for electricity bills , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Ismail Meghezzi-Larafi, Abdelouahab Tati, The effective length estimation of columns in semi-rigid jointed braced frames , Journal of Applied Engineering Science & Technology: Vol. 2 No. 2 (2016): JAEST
- Sabiha Aklouche‐Benouaguef, Belkacem Zeghmati, Bifurcations in two‐dimensional differentially heated cavity , Journal of Applied Engineering Science & Technology: Vol. 3 No. 1 (2017): JAEST
- Said Khoudiri, Fateh Benchabane, Khaled Yahia, Nonlinear control of a grid connected hybrid energetic systems (HES) based on photovoltaic- fuel cells distributed power generation systems , Journal of Applied Engineering Science & Technology: Vol. 4 No. 1 (2018): JAEST
- Houdayfa Ounis, Mohamed-Ouejdi Belarbi, On the thermal buckling behaviour of laminated composite plates with cut-outs , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Meriem Madhoui-Benchikha, Djamel Alkama, Thermal performance of the horizontal opening in the traditional houses of old Biskra. Case of traditional house at Bab Edarb , Journal of Applied Engineering Science & Technology: Vol. 4 No. 2 (2018): JAEST
- Mohamed Rezig, Kamel Srairi, Mouloud Feliachi, Lotfi Alloui, New designs systems for induction cooking devices for heating performances improving , Journal of Applied Engineering Science & Technology: Vol. 3 No. 2 (2017): JAEST
- Mohamed Khemissa, Abdelkrim Mahamedi, Lakhdar Mekki, Problematic soil mechanics in the Algerian arid and semi-arid regions: Case of M’sila expansive clays , Journal of Applied Engineering Science & Technology: Vol. 1 No. 2 (2015): JAEST
- Djemai Hocine, Hecini Mabrouk, Adnane Labed, On the characterization of sandwich panels for solar flat plate collectors’ applications: theoretical and experimental investigation , Journal of Applied Engineering Science & Technology: Vol. 2 No. 1 (2016): JAEST
You may also start an advanced similarity search for this article.